Click here to buy Underfloor Heating Manifolds Online
Pipe & Manifold Fittings
This page illustrates the wide range of Pipe & Manifold Fittings which you may need for your Heating installation.
Please note the following when connecting Pex Pipe (Underfloor Heating Pipe) to manifold
- Pipes should be cut straight with a pipe cutter.
- Do not use a saw of any type.
- Slide nut & compression ring over the pipe & push hose pillar completely into the pipe.
- Push the hose pillar with euro cone into the valve while holding the pipe, keep pushing upwards until nut is tightened, tighten nut hand tight & turn 1 x further turn with spanner.
- DO NOT OVERTIGHTEN
- Make sure pipes/ circuits are labelled.
The underfloor heating chrome manifold provides a fast and economical way to connect your underfloor heating pipes to your central heating distribution pipework. Pipe & Manifold Fittings include:
Image Below - Labelling tags are fitted around manifold port connection and pipework
Image Below - Manifold & Fitting Pipe Connectors 16mm x 1.8mm
Image Below - 1 Pair Straight Isolating Valves with Thermometers
Image Below - 22mm Straight Compression Coupler
We supply a wide range of Pipe and manifold fittings which can be used for Warm Water Underfloor Heating. The list of the type of items we have in stock continues below:
- Manifold & Fitting Pipe Connectors 16mm x 1.8mm
- Manifold & Fitting Pipe Connectors 15mm x 1.8mm
- 1 Pair Right Angled Isolating Valves with Thermometers
- 22mm Straight Compression Coupler
- 28mm Straight Compression Coupler
- Ball type pump valve 22mm copper pipe
- Ball type pump valve 28mm copper pipe
- Manifold pump connector
- 1/2" BSP manifold blanking plug with 'O' ring seal
- 16mm Underfloor heating pipe connector complete
- 16mm Underfloor heating pipe elbow complete
- 16mm - 1/2" BSP Male straight complete
- Drain valve with hose connector
- Lockshield kit with flow meter
- 24 X 19 x 1/2" BSP Male Straight Connector (requires 1 x ecocon)
- 24 x 19 x 1/2" BSP Female straight Connector (requires 1 x ecocon)
- Manifold jointing nipple with 'O' ring seal
- 1/2" BSP Male x 24 x19 Straight Fitting (requires 1 x ecocon)
- 24 x 19 x 1/2" BSP on Branch Tee (requires 2 x ecocon)
- 16mm - 1/2" BSP Female Tee complete
For installation questions or help with choosing the Underfloor Heating Manifold for your application please send us your e-mail on sales@underfloorheating1.co.uk or call our technical help line on 01302 727182.
Email: sales@underfloorheating1.co.uk
Web: www.underfloorheating1.co.uk - Buy Online using this Link
|
